Specification

Model:PW-70-2
Voltage:220V~/50Hz 
Motor Type:Brushless Motor 
Rated Power:1500 W (Warming)            
Current:7.5A         
Water Splash Proof:IPX1          
Drying Time:5-7 Seconds
Air Speed:85-95m/s  
Control Method:Microcomputer
Dimensions Individual:680*270*220mm  
Package:(1pcs):13.50kg by Solid Paper box. 

1.Infrared Sensor Design:
The unit's"Infrared Sensor Design"makes sure your hands don't come into contact with any surface when drying;
2.Antimicrobial & Nonflammable Material:The hand drying area, drain tank, and even drain hose have all been antimicrobial treated for better sanitation,the nonflammable material avoid any accidents.
3.Self Protect System
3-1:Self protection-To prevent overusing the unit, the built-in timer will stop the unit after 25 seconds.To continuous use,draw back your hands and put them in again.
3-2:Current protection-If the current is overrun the unit will stop working until the malfunction is eliminated.
3-3:Temperature protection- If any key part is not in good condition because of the high Temperature around the unit will stop working until the malfunction is eliminated.
3-4:Short circuits protection-The control system will stop working once short circuit happens.
3-5: Electromotor protection- If the electromotor or the fans can't work because of  sundries the control system will stop working until the malfunction is eliminated.
4.Sanitary: The hand drying area,drain tank,and even drain hose have all been antimicrobially treated for better sanitation
4-1:Alcohol-resistant resin used for the hand drying area allowing cleaning with alcohol.
5. For Facilities where Service is Important:
5-1:Large Office Buildings
5-2:Food Factory
5-3:Factory
5-4:Holtels
5-5:Department Stores
5-6:Casino
5-7:Restaurants
5-8:Amusement Centers
5-9:Supermarkets……. etc.